Presonus CDL Rigging Sling - Rigging Hardware for CDL SeriesThe CDL Rigging Sling is required on all installations that include 4 or more CDL series loudspeakers in a vertical array. Additionally, in installations using the CDL Rigging Extension Bar deployed with an upward or downward tilt of 12 or greater, the CDL Rigging Sling must be utilized. Features: Pull Back Sling for CDL Series Loudspeaker Arrays Size (H x W x D): 9. 25 x 1. 6 x 7. 7 inches Weight: 2. 5lbs

The two remaining pairs are available for signals to pass through from other Format-A senders connected to the LOOP IN jack

sub-miniature clip-on lavalier microphone which is suitable for all areas of live work

the info-rich display provides caller ID for each line

and operates stand-alone with various adapters

Marc One: The Monitor And Recording Controller with innovative features and a 32-bit AD/DA converter

and vice versa

10 Position 3 RU Rack Mount

This is the 100 foot extension cable for the Sennheiser rackmount receivers

The Line Out jacks are always connected to the input preamp signal for source monitoring or to allow use as a stand-alone phono preamp

Night Ringer (contact closure activation)

Constructed with sturdy weatherproof material

Excellent ambient noise attenuation (35 dBA)